Product Dose

Refer this link for complete set of HOLD CLEANING KIT  ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

Full range of HOLD CLEANING chemicals --- http://rxmarine.com/HoldSolution-22
 

 

For safe handling and optimal dilution we recommend the use of the UNITOR™ MIXING STATION 4-14.

Removal of soot from Inert Gas Systems (IGS) 

Recomendation dose for High Pressure Cleaning Machine and use 1:4 with water. However, if used with a hand sprayer, apply the product neat on the surfaces, allowing 1 litre per 12m2. Then wait for 30-45 minutes. The surface remains wet. If there is any possibilities to heat water then wash down with hot water (80°C) to get maximum results.

Repeat the procedure if necessary.

For safe handling and optimal dilution we recommend the use of the UNITOR™ MIXING STATION 4-14.

Removal of soot from Inert Gas Systems (IGS) 

Apply Unitor™ Aquatuff™ with a Unitor™ High Pressure Cleaning Machine and use 1:4 with water. However, if used with a hand sprayer, apply the product neat on the surfaces, allowing 1 litre per 12m2.

Leave for about 30-45 minutes. The surface remains wet.

Wash down with hot water (80°C) and check the results.

Repeat the procedure if necessary.